11 AltiTouch Plus User Guide
6. Install on a wall
To install the Model 390 on a wall:
Connect the cord to the wall jack (A). Coil the phone
cord into the space provided on the back of the phone
(B). Then align the telephone so the hooks on the
wall plate (C) align with the wall-mount slots on the
back of the phone, as shown here. Push the phone
onto the pegs, and then slide it down until it is secure
(D). Plug the power adaptor into a power outlet (E).
Note:
You may wish to purchase a short phone cord
from a local supplier for a wall installation.
7. Insert number card
Write your telephone
number on the number
card, and place it into the
card slot on the telephone,
located under the
mouthpiece in the handset
cradle. Gently bend the
clear plastic lens into the
slot, over the number card.
8. Insert Faceplate
Snap the faceplate into the recess provided above the
dial pad. Slide the tab on the left-hand side of the
faceplate into the slot. Then press on the right-hand
side of the faceplate to snap it into place.
