background image

WARRANTY INFORMATION

WHAT IS COVERED

SB Fitness warrants to the original purchaser of this CT700 Treadmill (the “Product”) 

that the frame of the Product shall be free from defect in materials and workmanship 

for a period of five years from the date of purchase. All other parts and components of the 

Product shall be free from defect in material and workmanship for a period of two years 

from the date of purchase when the Product is used under as recommended by SB 

Fitness under normal uses and conditions. During the warranty period SB Fitness will at 

no additional charge to you, repair or replace (at SB Fitness’ option) the frame or any part 

of the Product if it becomes defective, malfunctions, or otherwise fails to conform with 

this Limited Warranty. All labor shall be the responsibility of the owner.

WHAT IS NOT COVERED

This Limited Warranty applies only for Product sold in the United States under the SB 

Fitness brand name. This warranty does not cover normal wear and tear on items such as, 

but not limited to, transportation wheels, foot pedals, rubber grips, plastic end caps, 

scratched parts, broken covers, cosmetic damage, and excludes paint & finish. Wear items 

pertain to components that might need to be replaced due to wear and tear resulting 

from normal usage. This warranty is void if the Product is improperly stored, assembled, 

altered and/or modified in any way, misused, abused, is subject to accident, is improperly 

maintained, and this warranty does not cover repair for any noises such as: squeaks, 

clunks, thumps resulting from poor or lack of preventive maintenance. This Limited 

Warranty does extent to any Product that is damaged or rendered defective; (a) as a result 

of accident, misuse, or abuse; (b) use with the Product of any part not manufactured or 

sold by SB Fitness; (c) by modification of the Product; (d) by normal wear and tear; 

(e) operation using incorrect power supplies; or (f) as a result of service by anyone other 

than SB Fitness, or an authorized SB Fitness service provider. This Limited Warranty is void 

if the Product serial number has been defaced or removed. Should any Product be 

submitted for warranty service be found ineligible, an estimate of repair cost will be 

furnished.

WARRANTY SERVICE AREA

This applies after the 1 year labor warranty has expired.  Any labor cost is the responsibility 

of the original purchaser. If a Product part requires shipment after the parts warranty has 

expired, delivery or transport of that part is the purchaser’s sole responsibility and to pay 

for any fees associated with servicing of a Product. Any evidence of alteration, erasing or 

forgery of proof-of-purchase documents voids this Limited Warranty. This Limited 

Warranty applies only to Product purchased from SB Fitness or from an authorized SB 

Fitness reseller.

VOIDED WARRANTY

The warranty does not apply to any failure of the product or its components due to 

alterations or modifications, misuse and abuse, accidental damage, lack of maintenance 

or improper assembly. Improper assembly can be avoided if the unit is assembled by an 

authorized technician. Damage due to improper assembly is not covered by the warranty. 

Common assembly errors can include damaged wire harnesses, stripped screws and nuts, 

crank arms or damaged threads. If the serial number has been removed, altered or 

defaced, the warranty for the affected unit is voided.

DISCLAIMED WARRANTIES

THE PROVISIONS OF THIS WARRANTY ARE IN LIEU OF ANY OTHER WARRANTY, 

WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL. TO THE MAXIMUM EXTENT 

ALLOWED BY LAW, ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS 

WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR 

PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL 

PROPERTY, ARE EXPRESSLY EXCLUDED TO THE MAXIMUM EXTENT.

- 19 -

Summary of Contents for CT700






















Reviews: