PRODUCT MANUAL
Password Voice Recorder : SB-VR8204
Page 9
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
SET PASSWORD
This unit allows for password protection. You can turn password protection ON or OFF.
The unit begins by having password protection ON. The default password is 0000.
1. Turn unit ON (via side switch if this is the first time using it or via pressing and holding the
REC button until screen turns on)
2. When unit turns on it will prompt you to enter password. It will already show 0000 on the
screen. This is the default password.
Press the MODE button
to confirm password. Unit will now
proceed to DEFAULT SCREEN.
MODE
CHANGING PASSWORD:
Now that you are into the system, lets learn how to
change password or disable password. Lets start with
changing:
1. Turn screen on (if it is off, by pressing any key or
pressing and holding REC key till screen turns on)
2. PRESS & HOLD MODE button until you see the 4
icons (right)
3. Use PREV/NEXT to move to SETTING MODE
4. Press MODE
5. Press NEXT to highlight SET PASSWORD
6. Press MODE
7. Press NEXT to move to WRITE PASSWORD
8. Press MODE
9. You will be asked for your
OLD PASSWORD
which
is the current default password. Just press MODE to
confirm it.
10. On the next page you will be asked to enter
NEW
PASSWORD
. Use the NEXT/PREV buttons to move a
digit left or right and use the VOL+ or VOL- to change
the numbers up or down. Then press MODE to con-
firm your new password
VOICE
RADIO MODE
TIME SET
SETTING MODE
PREV
NEXT
