PRODUCT MANUAL
Digital Video Watch Recorder : SB-WR069B
Page 5
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
SETTING THE TIME & DATE
Now that the Time.txt file is saved on your
watch, Double-Click the file.
A standard text editor should open the file.
In Windows, this would be Notepad. On a
Mac, it would be TextEdit.
Adjust the Year-Month-Day (SPACE)
Hour:Minutes:Seconds as needed.
The punctuation and SPACE must remain.
When finished, SAVE this file.
Close the text editor.
To use the Time and Date you set, you must EJECT the watch from your PC and power it
up.
EJECT the watch from your PC. In Windows, right-click on the drive letter and choose
Eject. Wait for Windows to say it’s okay to remove the device.
Now, unplug the USB cable from the computer, then from the watch.
HOLD the B BUTTON until the Red and Blue light appear. Then, the Blue light will remain
steady. You are now in Stand By Mode. Your time is now set. Should the timestamp be
wrong in your files, please redo the setup.
NOTE: It is normal for the time.txt file to be deleted during power up. If it’s still there,
something is wrong with the file.