26
Press [MENU].
Using [▼ ] / [▲ ] to select “RINGER & BEEP”.
Press [O.K.] to enter into the selection.
Using [▼ ] / [▲ ]
to select “SET KEY BEEP” and press
[EDIT]. Current setting will be displayed. Using [▼ ] / [▲ ]
to switch between ON & OFF then press [SAVE] to confirm.
Answer Modes (only available in handset menu)
Handsets may be programmed to either auto or manual answer mode. When the
handset is not in the base unit or the charge cradle, [Talk] (or [Spk.]) key must be
pressed to answer incoming calls. Auto answer mode will only be activated when the
handset is in the base unit or in the charge cradle. In which case, the line is
automatically connected when it is picked up from the charge cradle.
Press [M ENU].
Using [▼ ] / [▲ ] to select “CRADLE ANSWER”.
Press [O.K.] to enter into the selection.
Using [▼ ] / [▲ ]
to switch between AUTO & M ANUAL then
press [SAVE] to confirm.
Contrast
Choose from 8 (1 – 8) different levels of display contrast to fit your operating
environment.
Press [M ENU].
Using [▼ ] / [▲ ] to access “CONTRAST”.
Press [O.K.] to enter into the selection.
Using [▼ ] / [▲ ] to adjust the contrast level.
Press [SAVE] to confirm setting.
Call W aiting ID Options
Call Waiting ID Options provide more options of disposing a waiting call. 5 dedicated
soft key labels display when there is an incoming waiting call.
Press [M ENU].
Using [▼ ] / [▲ ] to access “CW ID OPTION”.
Press [O.K.] to enter into the selection.
DAY VOLUME
NIGHT VOLUME
KEY BEEP
EDIT EXI
T
KEY BEEP:
v
ON
USE SAVE = DONE
EXIT
SAVE
AUTO MODE
MANUAL MODE
EXIT
SAVE
CONTRAST :5
v
USE SAVE = DONE
EXI
T
SAVE
CW ID OPTION
v
ON
USE
=CHANGE
EXI
T
SAVE
IN IT I AL S E T T IN GS
