48
Your new cordless phone provides a m ultiple handset capability which supports up to 4
handsets. Each additional handset com es with a charging cradle you can plug into any
electrical outlet. No extra phone jack is required. Many extra functions becom e
possible when there are m ore than one handset in your system . Register the additional
handsets (CY-671) see page 18.
INTERCOM
The base unit can support intercom conversation and an external call sim ultaneously.
Handset-to-Handset two-way intercom is operated independent of the base unit. It is
possible to make an intercom call between two handsets while another handset is
engaging the external line
W hen a HS is in standby m ode, press [Int.] key, LCD
display shows the base unit and all the other available
handsets in range of the base unit.
Using the [▼ ] / [▲ ] keys to m ove to the handset you want
to intercom with and press [O.K.]. For instance, if HS (2)
is being paged by HS (1), then HS (1) LCD display shows
“PAGING HS (2)
Handset (2) will ring and the display “PAGING FROM HS
(1)”.
Press [Talk], [Int.] or [O.K.] on the called handset to answer
the intercom.
If you do not want to answer it, press [EXIT] soft key and the
ringing will stop.
Note:
This phone system can allow you to conference or intercom by using the handset and base
simultaneously. If the handset is operated too close to the base unit, you may experience
feedback noise. Should this occur, move the handset away from the base unit and the feedback
will stop.
HS (2)
HS (3)
BASE
O.K. EXI
T
PAGING
HS (2)
EXIT
PAGING FROM
HS (1)
EXIT
INTERCOM
HS (2) HS (1)
VOL-2
EXIT
MU LT I-H ANDSET O PERAT IO N
