50
If you are busy and do not want to answer the call, press
[EXIT] softkey to reject the paging call. The ring will be
stopped and the handset returns to standby. If answered:
After the internal conversation, press [Talk] to take the call.
The external call is now completely transferred to this handset.
Transferring to all handsets
Following the same steps above, you can select to transfer the call to all handsets by
selecting “ALL” after pressing the [Int.] key. All handsets in range, including the base
unit, will ring. The first one responding will set up the communication link.
CALL CONFERENCING
Your new cordless phone supports conference calls up to 6 parties : 3 handsets, the
base unit and 2 external call
Multiple Party Conference Call
When engaged with an external line on the handset, press
[Talk] or [Spk.] key and other handset(s) or [
] on the base
unit to enter into a conference call.
“CONFERENCE” appears on the displays.
Press [Talk] on any handset to retreat from the conference.
To end the call, make sure all parties have disconnected from
the line.
Note:
This phone system can allow you to conference or intercom by using the handset and base
simultaneously. If the handset is operated too close to the base unit, you may experience
feedback noise. Should this occur, move the handset away from the base unit and the feedback
will stop.
MESSAGES
HS (2)
03:55PM 01/15
SAVE SERVICE M ENU DIR. DIAL V.M.
SAVE SERVICE M ENU DIR. DIAL
V.M .
TALK VOL-2
HOLD
SERVICE DIR. DIAL V.M .
SAVE SERVICE M ENU DIR. DIAL
V.M .
1234567
0:01:15 VOL-1
HOLD
3W AY
SERVICE DIR.
CONFERENCE
1 2
3 BS
.
MU LT I-H ANDSET O PERAT IO N
