SBC SBC-225, User Manual

10

Pulse/Tone Switch

Set it to TONE if you have “touch tone dialing”, or set it to PULSE if you have a 

“rotary dial phone”.

Speed Dial Memory Buttons

You can store up to 20 numbers with names in the Speed Dial Memory buttons. 

The memory buttons can be used to store phone numbers as well as Centrex system 

features. You can store 10 numbers on the memory speed dial keys for one-touch 

dialing and by using the 

SHIFT

 button, you can store another 10 numbers. 

To store names/numbers:

1.  Press and release the speed dial button to be programmed 

Note: To program the 2nd memory location for each button, press 

SHIFT

 then 

press and release the speed dial button to be programmed. Ensure that you 

press and hold the 

SHIFT

 button for approximately 2 seconds. Then press and 

hold the desired speed dial button for approximately 2 seconds.

2. The LCD will show the existing number programmed in that location. If no 

number has been programmed the LCD will read: “Memory Is Empty”

3. Immediately press the same speed dial button again and hold it until you see the 

cursor flashing on the right side of the LCD

4. Enter the phone number then press 

SAVE

5. The cursor will now be flashing on the first letter of the name line of the LCD (on 

the left side of the LCD) 

Note: To save only the number, simply press 

SAVE

 now

6. Using the keypad, enter the name (this will overwrite any existing text)
7. Use the < and then the 

Delete

 key to remove and unwanted text

8. Press 

SAVE

9. LCD will display “SAVE OK” and return to main screen after 4 seconds
 

To review names/numbers:

In the on-hook state, press the memory speed dial button (or 

SHIFT

 plus Speed Dial 

Memory button). The LCD will display the entry stored on that button location.

To dial from Speed Dial Memory:

•  One-touch dialing - In the off-hook state, press the Speed Dial button and 

the phone will automatically dial the number stored to that button.

•  Two-touch dialing - In the off-hook state, press the 

SHIFT

 button plus 

the desired Speed Dial Memory button to dial entries. The phone will 

automatically dial the number stored to the selected Speed Dial Memory 

button.

Network Service Buttons 

The network service buttons are memory keys programmed to dial as shown below: 

Functions

Stop Call Waiting Messages Call Forward On

Call Forward Off

*70

*98

*72

*73,Pause,Pause, End Call