16
CONNECTING THE BASE UNIT
1. Plug one end of the telephone line cord into the jack on the back of the base unit
and plug the other end of this cord into the house modular telephone wall jack.
2. Press the line cord in the slot provided.
3. Tie up loose cords to prevent tangling and tripping.
4. Plug the AC adapter into the 9V DC jack on the base and the other end into a
standard 120V AC wall outlet.
5. Press the cord in the slot on the housing to prevent the cord from pulling loose.
6. Set the base unit on a tabletop and then place the handset on the base unit.
Note:
1. Use only the AC adapter supplied. Do not use any others.
2. Connect the AC adapter to a continuous power outlet.
3. Place the base unit close to the AC outlet so that you can unplug the AC
adapter easily.
Tip
:
If your telephone outlet is not modular, contact your telephone company for
assistance.
SPARE BATTERY
You can use the spare battery pack to replace a drained handset battery to ensure
uninterrupted use.
1. Open the spare battery compartment by pressing the release button on the
right of the base unit.
2. Place a battery pack in the drawer with the charge contacts facing up and to the
right.
3. Push to close the drawer. Make sure the Spare Battery LED lights, and
charging begins.
G E T T I N G S TA R T E D
Summary of Contents for SBC-368
Page 10: ...9...
Page 51: ...50 NOTES...
Page 52: ...51 NOTES...
Page 53: ...52 SBC3681HS 20030913...