17
WALLMOUNTING BASE UNIT
The base unit can be mounted on a wall phone plate by using the supplied wall-
mounting bracket.
1. Bring the barrel plug of the AC adapter through
the rectangular opening on the bottom of the wall-
mounting bracket.
2. Plug the adapter’s barrel plug into the 9V DC jack
on the base unit and press the cord in the slot
provided.
3. Plug one end of the short telephone line cord into
the TEL. LINE jack at the bottom of the base unit.
4. Bring the free end of
the telephone line
cord through the
opening (between
the upper and lower
keyholes) in the
bracket.
5. Place the wall-
mounting bracket on
the bottom of the
base unit and insert two short tabs on the base
unit.
6. Press on the two hook-tabs, aligning it over the
respective slots and press down until it snaps into place.
7. Hold the base up next to the wall jack and plug
in the line cord.
8. Place the base unit on the posts of the wall
plate and push down until the unit is firmly
seated.
9. Plug the AC adapter into a standard 120VAC
wall outlet.
G E T T I N G S TA R T E D
Summary of Contents for SBC-368
Page 10: ...9...
Page 51: ...50 NOTES...
Page 52: ...51 NOTES...
Page 53: ...52 SBC3681HS 20030913...