7
CHARGING THE BATTERY PACK
Charge the battery pack for at least 15 hours the first time before you start using
your phone.
1. Press on the release point and slide downward to open the battery cover.
2. Insert the battery pack into the battery compartment and make sure to position
according to polarity markings.
3. Slide the battery cover upward until it snaps into place.
4. Place the handset on the base unit. Connect the AC adapter to the 9V DC jack
of the base unit and to a standard 120V AC wall outlet. Make sure that the
Charge LED of the base unit lights, and charging begins.
When the Battery Power Becomes Low
The battery icon
on the left of the display will be on and the handset beeps
intermittently while it is in use. If you DO NOT recharge the handset battery,
will
be on for certain period, and then “BACK TO CHARGER” is displayed and the
handset does not function when you press the keys.
Clean the Battery Contacts
To maintain a good charge, it is important to clean all battery contacts on the
handset and the base unit with a soft, dry cloth about once a month. Use a pencil
eraser or other contact cleaner.
Do not use any liquids or solvents.
Caution:
1. Use ONLY with SBC 368 AC Adapter (AC 120V, DC9V, 700mA).
2. The AC adapter must remain connected at all times (It is normal for the adapter
to feel warm during in use).
3. Do not remove the battery from the handset to charge it.
4. Never throw the battery into a fire, disassemble it, or heat it.
5. Do not remove or damage the battery casing.
6. If you do not expect to use your phone for a month or longer, remove the
batteries. Batteries can leak chemicals that can destroy electronic parts.
P R E PA R AT I O N
Summary of Contents for SBC-368
Page 10: ...9...
Page 51: ...50 NOTES...
Page 52: ...51 NOTES...
Page 53: ...52 SBC3681HS 20030913...
