Quanta series
– Hardware Manual
QUANTAHM.1.2
7. APPENDIX B: Packaging, labeling
7.1. Board Identification
SBG Systems manufacturing process is based on EN-9100 system with individual and full traceability of every
component and operation. Each board is identified by a unique serial number which is used to trace all operations
during the product lifetime such as manufacturing, calibration, tests and repairs.
In addition to a unique serial number, a “Hardware Code” and associated hardware revision are used to identify the
exact hardware model.
Finally, the “Part Number” is used for logistics purpose. It identifies uniquely the full product configuration,
including hardware type, software options, and any software or process customization.
You can find on the top or bottom sides of the boards, laser printed labels that hold the Hardware Code as well as
Serial Number and Hardware Revision. These labels also include a data-matrix code that encodes the device
unique serial number.
In addition, the board packaging includes a second label that provides other useful information such as exact part
number and installed firmware version.
32/48
Figure 7.1: Quanta processing module label
Figure 7.2: Quanta processing module package label
