Quanta series
– Hardware Manual
QUANTAHM.1.2
10. APPENDIX E: Development board specifications
10.1. Board overview
The evaluation board has been designed to test and configure the Quanta product without any electronics
development, thanks to standard connectors and cables.
Following connectors provide easy access to the board functionalities:
10.2. Interfaces specifications
10.2.1. Power input
The DC 2.1 mm DC jack input supports a wide DC input voltage range [6 – 36V].
Alternatively, for current monitoring purpose, it’s possible to directly power on the Quanta system (without
powering on the external components). In order to do so, the two jumpers between X6 and X7 should be defined
according to the following rule.
35/48
Ethernet
RJ 45
CAN DB9 (top)
PORT D DB9 (bot)
PORT B DB9 (top)
PORT C DB9 (bot)
PORT A
USB
Can Bus term.
ON/OFF
GNSS
antennas
PORT A/B
+SYNC IN/OUT DIL
PORT C/D
+SYNC IN DIL
PORT E / ODO
+SYNC IN DIL
CAN DIL
DC Power
IN
