4
Splitz-it 5-tON electric lOg Spliter
• Do not use the log splitter in wet or damp areas or expose
it to rain.
• Never try to split logs larger than those indicated in the
specifications table. Failure to do so may damage the
machine. Do not use the log splitter for anything other
than splitting logs. Do not force log through splitter.
• Never use an extension cord that is not rated for outdoor
use. The cord should not be longer than 30 feet. The cord
should be of a heavy-duty construction (12-10 AWG).
• Check that the electric circuit is adequately protected and
that it corresponds with the power, voltage and frequency
of the motor. Check that there is a ground connection and
a regulation differential switch upstream. Ground the log
splitter. Prevent body contact with ground surfaces: pipes,
radiatiors, ranges, refrigerator enclosures, etc. Never open
the pushbutton box on the motor. Make sure your fingers
do not touch the plug’s metal prongs when plugging in or
unplugging the log splitter.
• Do not remove jammed logs with your hands. If an object
becomes lodged in the ram, unplug electric motor before
attempting to remove the foreign object.
• Do not use the log splitter in areas where fumes from
paint, solvents, or flammable liquids pose a potential fire/
explosion hazard.
• Use only original equipment parts including all nuts and
bolts.
• Disconnect power by unplugging power cord when not in
use, before making adjustments, changing parts, cleaning,
or working on the log splitter.
• Maintain and keep the log splitter clean for the best and
most safe performance.
SAFETY DECAL
The Splitz-it 5-Ton Electric Log Splitter has been designed and
manufactured to provide you with the safety and reliability
you would expect from an industry leader in outdoor power
equipment manufacturing.
Reading this manual, and the safety instructions it contains,
will provide you with the necessary knowledge to operate this
equipment safely and effectively. We have placed a safety de-
cal on the log splitter to remind you of some of the important
information while you are operating the unit.
This important safety decal is illustrated below, and is shown
here to help familiarize you with the location and content of
the safety messages you will see as you perform normal log
splitting operations. Please review this decal now, and if you
have any questions regarding its meaning or complying with
these instructions, reread the complete safety instruction text
in this manual, or contact your local dealer.
the decal below is located on the side panel of the log cradle
above the main power switch.
Should this decal become un-
readable, because of being worn, faded, or otherwise damaged
during the use of your log splitter, please use the part number
information provided to order a replacement label from your
local authorized dealer. These decals are easily applied, and will
act as a constant visual reminder to you, and others who may
use the equipment, to follow the safety instructions necessary
for safe, effective operation of your log splitter.
warning Decal
1
2
3
4
5
6
7
8
9
10
11
STEpS FOR wORkING ON ELECTRIC LOG SpLITTER
1. Turn off motor switch. Unplug motor.
2. Replace or repair the part on the log splitter.
3. Check all parts that were repaired, or removed during
repair, to ensure they are secure and fit correctly.
NOTE: All repair parts must come from the factory. Never
replace parts that are not specifically designed for this log
splitter.
1. Crush hazard - hand
2. Take care when removing jammed logs from wedge
3. Clean up any spills
4. Read owners manual be fore using
5. Use protective eyeware
6. Danger - Keep clear of moving parts
7. Unplug before servicing
8. Maintain a safe distance from bystanders when operating
9. Do not operate without guards
10. Use protective footware
11. Use protective gloves.
