8
DMM Screen
No
symbol
Description
1
Minimum. Maximum, Average measurement
2
Can select Measuring Range in Automatic method or Manual
method
3
Freeze the present reading in display.
4
Freeze the present reading in display.
5
Sub Menu
The Subsidiary Menu. After main menu selected, sub menu tree
show up to select
6
Bar-Graph
Input Signal is displayed in Bar-Graph. refer details " Bar-Graph
page )
7
Compare with a reference value and display the Difference.
8
Negative Reading
9
Input Over Voltage warning that exceeds the defined safety
protection voltage
10
Remaining Battery Capacity level to use.
11
Being connected with AC Power Adapter.
12
Sampling, Run time
13
Measurement mode.(DCV, ACV, Ohm, Capacitance, Diode)
14
Audible signal is active
15
(Bar Scale) Range of Meter
16
Secondary
measurement
secondary measurement information of Input Signal (Hz.
㏈
m)
17
Unit symbol is displayed at right side of the measurement
