SBS TEEARBT480TWSW, User Manual

4

Charging

1. Use the micro USB cable to fully charge BT480 before using it.

2.  When the battery is low, the LED charging case flashes 

slowly in red for about 20 seconds: use the micro USB cable 

to charge it. During charging, the LED charging case flashes 

slowly in red and becomes fixed red when fully recharged

3.  When the earbuds are not charged, put them into the charging 

case. The LED of the charging case will turn blue and the LED 

of the earbuds will turn red. When the headphones are fully 

charged, the LED of the charging case will turn blue and the 

LED of the earbuds will turn off. 

Switching on/Association

1.  Remove the earbuds from the charging case: they will be 

activated automatically, emitting a quick beep.  The LEDs will 

simultaneously flash quickly in blue 3 times. 

2.  When the LED on the right earphone goes off and the left one 

flashes slowly in blue, it means that the earbuds are properly 

communicating with each other and are ready for pairing with 

the smartphone

3.  Now search for “SBS BT480 URBAN” in the list of Bluetooth 

devices found by your phone and select it to enable pairing.

4.  When the BT480 URBAN is successfully paired with the mobile 

phone, the earbuds emit a beep and their LEDs turn off.

Shutdown

1. Insert the earbuds into the charging case to switch them off

2.  The earbuds turn off automatically just 5 minutes after the 

Bluetooth connection is interrupted.

Voice command

1. When earbuds are waiting or playing music, press the L or 

R button for 2 seconds long to enable Siri or Google Assistant

Controls

1. Play/Pause music: Press the MLF L or R button once

2. Answer phone: Press MLF L or R once

3. Hang up: press MLF L or R once

4. Refuse call: long press MLF L or R button

5. Call last number: press MLF L or R quickly for 2 seconds

UK 

INSTRUCTION MANUAL