Customer Helpline
1300 889 028
11
Safety Information
Important
- Please read these instructions fully before starting assembly
General Power Tool Safety Warnings
When the log is supported on one end, as illustrated in Figure 4, cut 1/3 the diameter
from the underside (underbuck) (1). Then make the finished cut by overbucking (2) to
meet the first cut.
2
2/3
1
1/3
Figure 4
When the log is supported on both ends, as illustrated in Figure 5, cut 1/3 the diameter
from the top (overbuck) (1). Then make the finished cut by underbucking (2) the lower
2/3 to meet the first cut.
1
2
1/3
2/3
Figure 5
