Scag Power Equipment SE-3.5BS Operator'S Manual Download | Manualshive

Page: 2 / 16

background image

FAILURE TO FOLLOW SAFE OPERATING PRACTICES

MAY RESULT IN SERIOUS INJURY.

* Keep all safety shields in place.
* Before performing any maintenance or service, stop the machine and
remove the spark plug wire.
* If a mechanism becomes clogged, stop the engine before cleaning.
* Keep hands, feet and clothing away from power-driven parts.
* Read this manual completely.
* Keep others away from the edger while operating.

REMEMBER - YOUR EDGER IS ONLY AS SAFE AS THE OPERATOR!

Hazard control and accident prevention are dependent upon the awareness,
concern, prudence, and proper training of the personnel involved in the op-
eration, transport, maintenance, and storage of the equipment.

WARNING

This manual covers the operating instructions

and illustrated parts list for:

SE-3.5BS with a serial number of 4800001- 4809999

Always use the entire serial number listed on the serial number
tag when referring to this product.

«
1
2
3
4
...
»

Summary of Contents for SE-3.5BS

















Reviews:

No comments

Related manuals for SE-3.5BS

EDGE HOG LE750 5

Brand: Black & Decker Pages: 7

Brand: Echo Pages: 24

Brand: Mantis Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands