Scala Inc.
Confidential
Confidential
© 2020 Scala Inc. All Rights Reserved
Page 3 of 3
1.
2.
3.
4.
There are two methods for setting up the Scala Media Player-L unit:
Using a mouse and keyboard.
Network set-up using a remote connection.
Required Materials for Set Up
In order to set up the Scala Media Player device, you will need:
Display screen
HDMI cable
RJ-45 cable for wired networks
120V or 240V electrical outlet
Wireless mouse and keyboard
-or-
Laptop running
and connected using an Ethernet crossover cable
tnviewer.exe
Connecting the Cables
Use the following instructions to connect the cables to the player.
Connect the Scala Media Player-L unit to the display using the HDMI cable.
If using a
network, plug a cable into the RJ-45 jack on the back of the unit.
wired
If using a
network, screw the included antenna into the antenna connector on the back of the unit.
wireless
Plug the power cord into the power connector on the back of the unit.
Plug the power cord into a 120V or 240V electrical outlet.
Once the unit is plugged in, the Scala Media Player starts and displays the
account. If the unit does not automatically
Configure Player
start, press the power button on the right side of the device.
Important
Before proceeding with player configuration, ensure that you have created a player profile in Content Manager. See
for more information.
