1
© 2007. Scaletron Industries Ltd. Plumsteadville, PA Scaletron. Scaletron Sets The Standard In Corrosion Resistance. Model 1099, Model 2305, Model 2306, Model 2307, Model
2310, Model 2330, Model 2350, Model 2352, Model 2353, Model 3001, Model 3002, Model 3001 SI, Model 3002 DI, Model 3003, Model 3004, Model 3005, Model 3006, Model 3050-1,
Model 3050-2, Model 4010, Model 4020, Model 4021, Model 4030, Model 4040, Model 4042, Model 4042WB,Model 4041, Model 4042, Model 4042 WB, Model 5305, Model 5305-2, and
ProGram Guide are trademarks of Scaletron Industries Ltd. Total Electronic System is a service mark of Scaletron Industries Ltd. All Rights Reserved. .PRINTED IN U.S.A. JULY 2007.
These instructions generally describe the installation, operation, and maintenance of subject
equipment. The manufacturer reserves the right to make engineering refinements that have not been
described herein. Should any questions arise that may not be answered specifically by these
instructions, they should be directed to
Scaletron Industries Ltd.
,
Or Our Sales Agent
for a
response.
All possible precautions were taken in packaging each piece of equipment to prevent shipping
damage. Carefully inspect each item and report damages immediately. Report all damage claims to
the shipping agent involved for equipment shipped F.O.B. job site. Do not install any damaged
equipment.
All instructions given on any labels, or attached tags, should be followed. Carefully inspect all
packing material before discarding to prevent the loss of accessories, mounting hardware, spare
parts, or instructions.
TABLE
OF
CONTENTS
PAGE
I. GENERAL
DESCRIPTION…………………………………………………………………………….1
II. SPECIFICATIONS…………………………………………………………………………………..1 - 2
III. ASSEMBLY
AND
START-UP…………………………………………………………………………2
IV. GENERAL USE INSTRUCTIONS…………………………………………………………………….3
V. CALIBRATION PROCEEDURE………………………………………………………………..…3 - 4
VI. TROUBLESHOOTING…………………………………………………………………………………4
VII. BOARD DIAGRAM…………………………………………………………………………………5 - 6
I. General
Description:
The Model 4042™ and 4042WB™ Secondary Spill Containment Scale is designed specifically
with a built-in containment basin. Off center loading or solid materials do not affect the scale
accuracy due to the four cell design. Mixers and pumps may be used with this base design.
Different base sizes are available, as well as custom bases for different size platforms and
large capacities. The maximum net weight is 199.9 lb./ or kg. with 0.1 lb/ or kg resolution, or
with a maximum net weight exceeding 199.9, the decimal is blanked at the factory, and the
display can read 1999 lb/ or kg. on the standard, 3 ½ Digit indicator.
The design of the platform includes sturdy four point support, with a polyethylene containment
basin. The base is coated with dry polyester powder coating to prevent corrosion. Scale has
four temperature compensated strain gauge transducers.
Standard Parts
1 Base assembly
1 Weigh Meter (indicator)
1 Power Cord
1 Technical Manual
Available Options
A. Remote mounting of standard enclosure
B. Load Cell Cable
C. Low Level relay contact
II. Specifications:
Display:
LCD, 3 ½ Digit with minus sign liquid crystal display, 0.5 inch high, seven segment
Resolution:
Tank: 199.9 lb x 0.1 lb, or 200 to 1999 lb.x 1.0 lb.
