Date and Time
In the Date and Time tab you can set the time to 24h or 12h stan-
dards. You can also click the use local time button and the camera
will configure itself to the time of your computer.
Note:
When clicking the Use Local time and then clicking Save set-
tings, the camera will produce a popup with a countdown for the
camera to restart. This is done to get “RTC” (Real Time Clock) to
store into the hardware of the camera. Once the countdown is com-
plete, you will be brought back to the
login screen
of the camera.
Error Log
In the Error log tab you can modify how error logs are sent to you,
You can choose
critical
,
warnings
,
information
or
all
to be emailed
to you on a regular basis. They can be sent daily, weekly or monthly
mailing intervals.
The
recipient
email address is based on the information setup in the
SMTP protocol tab.
You may also view the log here by clicking
View Log
. A pop up
screen will appear with the log inside. You can copy and paste this
log into an email and send it to Scallop Imaging if there is an issue
that needs technical support.
Status LED
On the front of the camera, is a bright green Status LED. You have
the ability to turn this light on and off depending on your require-
ments. Once the modification has been made click
Save Settings
.
20
Camera Settings
(continued)
