WIRE LESS BAR CODE SCANNER
28
Wire Less Communication Setting
Unpair the scanner from host
Unpair the scanner from host
Pair Scanner with Host
Pairing is the process by which a scanner initiates communication with a host. The scanner with the Host pairing as
follows:
1. Connect the scanner to the Host with the Charging Cable.
2. Press the "Pairing Button” until the Scanner issued a "beep beep" sound.
NOTE: A host is able to work with as more as 99 scanners at the same time.
Clear the Buffer of Scanner
Scan the setting bar code below will clear the bar code data save in the scanner buffer.
Clear the Buffer of Scanner
Wire Less Channel
When there are more than one host work in the same Space, every host has to work in different channel. Channel is
set as follows:
1. Open a Notepad or other text editor.
2. Press the "Channel Settings button" to change the channel of a host, and the channel NO will be displayed in
the screen.
Scanner ID
Set the Scanner ID
(
2 Digits
;
00~99
;
00*
)
Add Scanner ID as Prefix
If this item is enabled, the scanner will add its ID as prefix of every barcode. E.g. When scan the bar code
“12345”,if the ID of the scanner is “15”,and the output barcode data will be “ID1512345”.
NOTE: The ID of a scanner can be set manually or assigned by the host automatically. Every scanner work
with the same Host can‟t be with the same ID.
Enable Add Scanner ID as Prefix
Summary of Contents for SCWBS-1
