17
Use the tool remove the shaft and 2 parts of stopped, and as-
semble into the location of below drawing
This situation apply to open door in right side This situation ap-
ply to left side
Assemble the door of refrigerator and freezer to the opposite
side a℃Use the hand lift the adjustable feet in cabinet, assemble
the lower hinge into other side of cabinet, fix 4 bolts in lower
hinge
Exchange the adjustable feet in two sides, assemble a lower ad-
justable feet in side of lower hinge. Adjust the height of feet to
put the refrigerator in a level stable.
1 Assemble freezer door and rotation 180°of middle hinge in
side of cabinet, fix 3 bolts of middle hinge
2 Assemble refrigerator door and upper hinge to side of cabi-
net, fix 4 bolts of hinge and cover the hinge.
3 Assemble the hole of roof in side of cabinet, fix 2 bolts in
hole of roof.
The install of door have finished so far
NOTE: If you want to have the door swing reversed, we re-
commend that your contact a qualified technician. You should
only try to reverse the door yourself if you believe that you are
qualified to do so.
All parts removed must be saved to do the reinstallation of the
door. You should rest the fridge freezer on something solid so
that it will not slip during the door change process. Do not lay the
fridge freezer flat as this may damage the coolant system. Ensure
the fridge freezer is unplugged and empty. We recommend that 2
people handle the fridge freezer during assembly.
Correct Disposal of this product
This marking indicates that this product should not be dispo-
sed with other household wastes throughout the EU. To pre-
vent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this
product for environmental safe recycling.
