Content
Installation ......................................................................2
Installation
Approval
Technical
data
and
dimensions
Assembly ..........................................................................3
Unpacking
Service
package
Load
bearing
underlay
Floor
plate
Adjusting screws
Type plate
Compartment under combustion chamber
Product registration number
Revolving base
Accessories
Positioning your wood-burning stove
Position in relation to non-flammable walls
Distance to flammable walls
Distance
to
furniture
Connection between stove and steel chimney
Requirements
for
chimney
Connection with 90° elbow pipe
Revolving base and 90º elbow pipe
Flue collar top outlet
Preparing the stove for rear outlet
Fresh
air
intake
External combustion air
Fitting the fresh-air connection piece
Instruction for use ........................................................7
CB Technology
Primary
air
Secondary
air
Smoke
deflector
plates
Ash
pan
Handle
for
riddling
grate
Settings for normal load
Instructions for heating ..............................................8
Lighting
Handling
fuels
Maintenance ...................................................................9
Chimney connection
,
revolving base ....................10
Solution with elbow pipe for brick chimneys
Top mounted steel chimney
Troubleshooting ............................................................12
2
I N S TA L L AT I O N
Installation
The house owner is responsible for ensuring that all necessary nati-
onal and local safety measures are observed during installation and
fitting and also responsible for observing the fitting and operating
instructions detailed in this manual.
When you install any kind of fireplace or stove, you must inform the
local authorities. You are also responsible for calling in a chimney
sweep to inspect and authorize the installation.
To ensure best-possible functionality and safety for your installa-
tion, we advise you to call a professional fitter. Our Scan Dealer will
be able to recommend a qualified fitter in your area. For information
on Scan Dealers, please go to www.scan.dk.
Approval
If you intend to connect your stove to an existing chimney, it makes
sense to contact an authorised Scan dealer, or a local chimney sweep
for advice. These experts will also let you know if your flue needs
renovating.
On connecting to a multiple element chimney: follow the vendor‘s
instructions as applicable to the chimney type (e.g. Leca, Plewa, Ico-
pal, Isokern, Zanda etc.)
No matter whether an authorised Scan dealer installs your stove, or
you do the job yourself, remember that the chimney sweep has to
approve the installation before you start to use it.
Technical data and dimensions
CO Emission at 13% O2:
0.09%
Støv @ 13% O2: 42 mg/Nm
3
Nox @ 13% O2: 114 mg/Nm
3
Efficiency: 79%
Rated heat load:
6 kW
Chimney temperature:
290°C
Flue outlet flow:
7.5 g/Sek
Recommended vacuum in flue collar:
16 Pa
Combustion air requirement:
21 Nm3/h
Recommended fuel:
Wood
Fuel consumption:
2.25 kg/h
Amount of fuel:
1.7 kg
Min./max. heating performance (vendor specification):
4-8 kW
Weight: 125
kg
Flue collar internal diameter:
135 mm
Flue collar external diameter:
148 mm
Approval type:
Intermittent fuelling
Intermittent fuelling means normal use of a woodstove. In other
words, you should let the fire die down until only the embers are
left, before refuelling.
The Scan
50-
series was build in compliance with the homologized
product type specified in the Assembly- and Instructions Manual
provided with the product.
The Scan
50-
series
The Scan
50
-series comprises the following wood-burning stoves:
Scan
50
and Scan
50
Maxi: Stoves with fixed base.
Scan
50-5
and Scan
50-5
Maxi: Stoves with revolving base.
