6
A S S E M B LY
Load bearing underlay
All of the products in our portfolio are classified as light-duty firepla-
ces; in most cases, there is no need to reinforce the floor, so that you
can typically use the normal floor.
However, you should make sure that the load bearing underlay can
bear the weight of the wood-burning stove and that of the chimney.
Floor plate
If you are setting up the stove on a flammable floor, observe national
and local regulations on the size of the non-flammable underlay that
covers the floor around the stove.
Your local Scan dealer can advise you on regulations concerning
flammable materials in the vicinity of your stove.
The idea behind the floor plate is that it protects the floor and flam-
mable material against sparks.
The floor plate can be made of steel or glass, and the stove can be set
up on brick, natural stone or similar materials.
This Scan wood-burning stove has an integrated floor plate, and
can thus be set up on any flammable material without a protective
underlay.
Adjusting screw
Your Scan wood-burning stove has 6 adjusting screws at the base
which you can use to level the stove.
Afmonter hylde og nederste svøb hvorpå justering kan foretages
(anvend evt. nøgle fra servicepakken).
A
A
The stainless-steel shelf at the front is mounted as fol-
lows:
Press the spacers into the holes on the lower plate and mount the
plate on the oven. Then the upper plate is laid on the spacers.
Product registration number
Remove the front shelf carefully; you can then read, and make a note
of, the product registration number.
Product registration number
Door
The stove door is locked on delivery. To open the door, pull out and
turn the fastener. Do not use the fastener under normal circum-
stances to avoid scratches and unnecessary wear and tear on the
guide axis.
If you want to hold the door at the top position, the fastener is used
for doing so.
Fastener
Accessories
The following accessories are available for this model
• Deco
angle
• Flue
cover
•
Front shelf in the following materials:
Stainless steel
Black glass
Frosted glass
•
Connection piece for fresh air intake
Make a note of your stove’s product registration number here so
that you have it available if you need to contact us.