Warranty conditions
All SCAN wood-burning stoves and inserts are made of
first-class material and are subject to a strict quality control
before they leave the factory. However, if an error should
occur, we back all SCAN wood-burning stoves and inserts
with an extensive, five-year limited warranty.
See also the
General Instructions for Installation
delive-
red with your insert for more details.
Krog Iversen & Co. A/S - DK-5492 Vissenbjerg
SCAN DSA 8 & 8-5 in an existing fireplace
If you plan to insert a SCAN DSA 8 or 8-5 into an existing open fireplace, it is important that you keep a distance of 3-5 mm
around the masonry. This will prevent cracks in the bricks, as metal expands when heated.
NB: Wood-burning inserts are exclusively to be mounted in non-combustible constructions.
Production number
Write the production number of your
insert here so that you have it at hand
in case you need to contact us.
SCAN DSA 8 & 8-5
Secondary
air
%
Primary
air
%
Amount of
fuel
kg
Chimney
draught
Pa
Flue outlet
flow
g/S
Temp. flue
outlet
°C
Rated output
kW
Fuel
kg/h
Efficiency
%
75
75
2
16
7,5
380
7
2,5
78
We recommend a chimney draught of 16 Pa in order to achieve an optimal functioning of the insert under all conditions.
5
1
6
780
726
3
6
7
1
2
9
5
6
2
4
9
7
2
0
3
100
5
3
4
5
9
9
Measurements for insert with connecting piece for
fresh air inlet with valve
Technical info and measurements
Emission (% CO at 13% O2): 0,11%
Efficiency: 78%
Rated output: 7 kW
Chimney temperature: 380 C°
Flue outlet flow: 7,5 g/sek
Recommended low pressure in conn. piece: 16 Pa
Recommended fuel: Wood
Amount of fuel: 2,0 kg
Min./max. (information from the factory): 3-8 kW
Weight: 89 kg
Connection piece, int. diameter: 156 mm
Connection piece, ext. diameter: 160 mm
Approval type: Intermittent
Intermittent combustion is the same as a normal use of the
wood-burning insert. This means that the wood should burn
down to embers, before refilling the stove.
SCAN DSA 8 and 8-5 are produced according to the type
approval of the product in which are included the instructions
for installation and use.
Adjustment at normal charge for SCAN DSA 8 and 8-5