5
Chapter 2 – Installation
2.1 General Requirements
2.1.1 Location Requirements
Install the unit on a firm and level floor in an indoor environment.
Allow at least 150 mm (6”) of open space on the sides, top and rear.
The location should be sufficiently ventilated so the heat from the unit can be removed from the area
to prevent any potential overheating condition of the ambient temperature.
Avoid installing a unit in an area with direct heat source such as sunlight, heat radiator, and other
heat sources.
CAUTION
Do not position the unit in a way that impedes access to the disconnecting device or circuit
breaker in the back of unit.
