SHC 2000
4
Operating manual
Description
The circulators SHC 2000 are designed for temperature application to specific fluids in
a bath tank.
The circulators are operated via the splash-proof keypad. The implemented
microprocessor technology allows to set and to store the setpoint that can be
indicated on the LED temperature display.
The PID temperature control adapts the heat supplied to the thermal requirements
of the bath.
Safety installations conforming to IEC 61010-2-010.
The excess temperature protection is a safety installation independent from the
control circuit.
The safety value is set using a tool (screwdriver).
If the low level protection device is triggered, a complete shutdown of the heater
and circulating pump is effected.
The circulator conforms to the relevant requirements specified by European
guidelines.
The circulators are not conceived for direct temperature application to
food and luxury articles or pharmaceutical and medico-technical products.
Direct temperature application means: Unprotected contact of the object
with the bath medium (bath fluid).
Operator responsibility – Safety recommendations
The products of ScanCool warrant a safe operation if installation, operation and
maintenance is carried out according to common safety regulations. This section
informs you about potential dangers that may arise from operating the circulator and
also mentions the most important safety precautions
Persons:
The operator is responsible for the qualification of the personnel operating the units.
The operator should be constantly informed about the dangers involved with their job
activities as well as preventive actions.
Make sure all persons expected to carry out operation, installation and maintenance of
the unit read and understand the safety information and operating instructions.
When using hazardous materials, the circulator may only be operated by persons that
are absolutely familiar with these materials and the circulator. These persons must be
fully aware of possible risks.
If you have any questions concerning the operation of your unit or the information in
this manual, please contact us!
