Circular Slot
Groove to the
back end.
3
Circular Slot
Wood Dowel
Wood Dowel
Groove to the
front end.
Step 2
Please choose beforehand which end will be your
entrance. With the help of another person place
the base in the location you desire.
Step 3
Take the Central Back Panel and place it on the designa-
ted groove to the back end. Wedge the wood dowel
into the circular slot at the groove base.
Use the rubber mallet gently to tap the top of the door
frame, so everything is wedged in the correct place. You
can also use the rubber mallet to adjust any point you
feel necessary and use a Level to verify that everything
is centered and leveled.
Step 1
Although the Barrel Sauna is an outdoor product, the
assembly must be carried out on a clean, smooth, and
dry surface such as a deck or concrete floor and not
directly on the grass, sand, dirt, or snow. Make sure
that you have access to a 220-volt electrical power
source. If you wish, you can also assemble it indoors.
After choosing the ideal surface, place the base.
Use the rubber mallet and gently hit the top of the door
frame, so everything is wedged in the correct place. You
can also use the rubber mallet to adjust any point you
feel necessary and use a Level to verify that everything is
centered and leveled.
Step 4
Take the Door Frame and firmly hold the door so it
does not move. Place the door frame on the designated
Groove on the front end. Wedge the Wood Dowel into
the Circular Slot at the Groove base.
Step 5
Put two staves on the top of the door frame and the
central back panel. Do not screw the top staves in this
step. With the rubber mallet hit the edges close to the
staves just above the door frame and central back
panel to create stability.
