4
6.Function Operation instructions
1
、
Plug in the appliance and thermostat works at 4 level.
2
．
When the fridge door is opened, the control panel will illuminate and lamps in fridge compartment are turned on, but
the fan in fridge will stop. After 60s since door’s opening, door-opening alarm starts working and sends out continuous
sonic signals. After 420s since door’s opening, lamps eliminate automatically but can be illuminated by touching switch.
During opening of the fridge door, control panel keeps illumination. When door’s closed, internal lamps eliminate at once
and control panel eliminates 60s later.
3
、
If you want to adjust the inside temperatures, please press button
,choose different levels from 1 to 6 to get lower
temperature.
4
、
Press button
for 3 seconds to switch off your appliance and the button illumines, power is cut off. Internal lamps
eliminates, compressor stops working. Press the button
for 3 seconds to switch on your appliance, the symbol
shines and power is connected again.
5
、
On the no frost models, there is a function : compulsive defrosting. For purpose of service or cleaning, the frost on the
freezer evaporator need to be removed. Press the buttons
+
for 3 seconds to switch on the compulsive
defrosting function and button
flashes. The function stops automatically when the sensor detects designed
temperature 10~12
℃
.Press buttons
+
for 3 seconds to switch off the compulsive defrosting function manually,
and the button stop flashing.
6
、
Fault display and alarm
This appliance has ‘fault display & alarm’ function. Once the sensors got fault, there are alarms displayed on the
temperature displaying.
1 – Sensor of fridge compartment
2 – Sensor of freezer evaporator
3 – Sensor of freezer
The appliance still cools but professional service engineer should be called and check the appliance.
7
、
Appearance and internal schematic diagram of simple electronic
