13
c Insert the door bush and door communication line into the
hole on the door and then put on the small end cap cover.
d
.
Use a tool to remove the 2 screws as shows in the below fi-
gure to remove the hole cover on the cabinet top and get
the cabinet communication line out of the hole.
Pry up the small end cap cover on the door and get out the
door bush and door communication line.
e
.
Insert the door bush into the round hole on the door and
then put on the small end cap cover.
f
.
Move the refrigerator door upward over 500mm to remove
the door.
2. a
.
Use a tool to remove the 3 screws off the middle hinge
cover and then remove the middle hinge.
b move the freezer door upward over 500mm to remove the
door.