1
User Manual
PR816-12R
Introduction
PR816-12R is a power supply in a 19” standard 1U rack, which can transform AC120V or 230V to 16 ports of
regulated DC12V 0.5A output. It's a perfect power supply for numbers of cameras, housing, pan tilt turning
devices or other surveillance equipment in a security center.
Features
Built-in NFB to avoid current overload.
Built-in PTC fuse for overcurrent and resettable protection on each port.
Built-in a fan at front and back panel to lower the operating temperature.
Installation View
Caution for Operation
1.
PR801 built-in short protection circuit, the device will open while it is in short condition. Please
check the system to find out what caused short. After the problem has been solved, reset the
power switch and then the system will operate properly.
2.
PR816 has built-in resettable fuse on each port. The device will open while it is in short condition.
Please check the system to find out what caused short and solve it. The device will auto reset
after the system is recovered.
Caution
Connect only one device to one port, never connect one device to two different ports, or it will lose
protection. (See below drawing)
