background image

 

To User 

Scania Higer A80, mounted with original SCANIA chassis, is a 

newly developed deluxe coach. 

The coach mainly runs on the high graded road and highway for 

passenger transportation and tourism, etc. 

This driver’s instruction contains operation, structure, specification 

and maintenance of the coach body. You are kindly advised to read the 

manuals carefully for the correct operation and maintenance of your 

coach. 

In regard to the chassis instruction, please read the  “Scania 

Driver’s Instructions”  and keep the operating instructions within the 

vehicle. 

Correct operation and maintenance can result in good 

performance and longer service of the coach as well as claim 

permission. 

This driver’s instruction is edited on the  basis of the products 

before delivery from the factory. Higer Bus Company Limited reserves 

the right to modify the specification or change the parts or components 

of this model at any time without modification of the delivered coaches. 

In case of any questions or suggestions concerning our coaches, 

you are welcome to provide feedback for our continuous improvement 

of our products as well as better service for you. 

HIGER Bus Company Limited 

                                                    Sep 2012

 

Summary of Contents for Higer A80













































































































Reviews: