30
Instructions for use
|
SCANIA Interlock
®
7x00
|
Maintenance
7 Maintenance
7.1 Calibration/adjustment
●
Only by an authorized Dräger Interlock service centre.
●
Check calibration at least every 12 months.
●
Once the service interval expires, the display shows the message
Service
required
in
X
days
.
●
If the unit is not serviced, the vehicle can nevertheless be started during a
transition period of several days (dependent on the configured parameters).
7.2 Cleaning
●
To clean, wipe with a disposable tissue.
●
Do not submerge in liquid – liquid must not enter the sockets!
8 Disposal
Dispose of the product in accordance with the applicable rules and regulations.
9 Technical
data
For information on suitable cleaning agents and disinfectants and their
specifications, see document 9100081 at
www.draeger.com/IFU
.
This product must not be disposed of as household waste. This is indi-
cated by the adjacent symbol.
You can return this product to Dräger free of charge. For information
please contact the national marketing organizations or Dräger.
Measuring principle
Electrochemical DrägerSensor
Measuring range
up to 3.0 mg/L
Ambient conditions
for operation and storage
-40 to 85 °C
20 to 98 % rel. hum.
600 to 1100 hPa
No influence of changes in altitude on the
measurement result
Sensitivity drift
typically 1 % of measured value/month
Display
Display
Calibration interval
typically 12 months
Dimensions (H x W x D)
Handset
approx. 138 mm x 61 mm x 36 mm
Control unit
approx. 148 mm x 90 mm x 32 mm
Weight
Handset
approx. 240 g
Control unit
approx. 240 g
Voltage supply
12 to 24 V
Power consumption
maximum
<2.5 A
stand-by
<1 mA
Switch relay for the lead for the starter relay
continuous
<16 A
peak
<40 A
Output relay
switchable de-energized
48 V
switchable energized
24 V