Dépannage
|
Notice d'utilisation
|
SCANIA Interlock
®
7x00
45
Défaut combiné
/
contacter SVA
Défaut du combiné.
Couper le contact, le rétablir et répéter le test. Si le
message d’erreur « Contacter un centre SAV Dräger-
Interlock autorisé » est réaffiché.
Défaut Centrale
/
contacter SVA
Défaut de la centrale.
Couper le contact, le rétablir et répéter le test. Si le
message d’erreur « Contacter un centre SAV Dräger-
Interlock autorisé » est réaffiché.
Contrôler câble et
reconnecter!
Absence de liaison entre le combiné et la centrale.
Contrôler le connecteur du câble de connexion et le
reconnecter avec le combiné et la centrale. Si le mes-
sage d’erreur « Contacter un centre SAV Dräger-Inter-
lock autorisé » est réaffiché.
Centrale
incompatible
,
Version logiciel:
OK
La centrale et le combiné ont des versions logi-
cielles différentes.
Les versions du logiciel (par ex. Rév. 1.9) sont affi-
chées après confirmation avec la touche OK. Contac-
ter un centre SAV Dräger-Interlock qualifié.
Aucun message lisible ne s'affiche sur le combiné,
mais les voyants fonctionnent.
La température du combiné est trop faible.
Effectuer le test comme d'habitude en suivant les indi-
cations des voyants.
Retirer le combiné et l'amener dans un endroit où la
température est plus tempérée. Rebranchez le com-
biné.
Aucun message ne s’affiche sur le combiné.
Absence de liaison entre le combiné et la centrale.
Vérifier le connecteur du câble de raccordement,
débrancher le connecteur du combiné et le rebran-
cher.
S'il n'y a toujours pas de message : contacter un
centre SAV Dräger-Interlock qualifié.
Erreur/Affichage
Cause
Solution