46
Notice d'utilisation
|
SCANIA Interlock
®
7x00
|
Maintenance
7 Maintenance
7.1 Calibrage/Ajustage
●
Exclusivement par un centre SAV Dräger-Interlock qualifié.
●
Vérifier le calibrage au moins une fois par an.
●
Une fois l’intervalle d’entretien écoulé, apparait sur l’afficheur le message
Entretien requis
dans
X
jours
.
●
Si l'appareil n'est pas soumis à une maintenance, il est néanmoins possible
de démarrer le véhicule pendant quelques jours (en fonction des
paramètres réglés).
7.2 Nettoyage
●
Essuyer avec un chiffon à usage unique.
●
Ne pas immerger dans des liquides, ne pas laisser de liquide pénétrer dans
les prises !
8 Elimination
Eliminer le produit en respectant les prescriptions en vigueur.
9 Caractéristiques
techniques
Informations sur les produits d’entretien et de désinfection et leurs
spécifications, voir Document 9100081 sur :
www.draeger.com/IFU
.
Il est interdit d'éliminer ce produit avec les déchets domestiques. C'est
pourquoi, il est marqué du symbole ci-contre.
Dräger reprend gratuitement ce produit. Pour de plus amples informa-
tions, veuillez contacter les distributeurs nationaux ou vous adresser
directement à Dräger.
Principe de mesure
Capteur électrochimique DrägerSensor
Plage de mesure
jusqu'à 3,0 mg/L
Conditions ambiantes
En fonctionnement et en
stockage
-40 à 85 °C
20 à 98 % h. r.
600 à 1 100 hPa
Les changements d'altitude n'ont aucune
influence sur le résultat de la mesure
Dérive de la sensibilité
généralement 1 % de la valeur
mesurée / mois
Afficheur
Display
Intervalle de calibrage
généralement 12 mois
Dimensions (H x L x P)
Combiné
env. 138 mm x 61 mm x 36 mm
Centrale
env. 148 mm x 90 mm x 32 mm
Poids
Combiné env.
240 g
Centrale env.
240 g
Alimentation électrique
12 à 24 V
Consommation
maximale
<2,5 A
en veille
<1 mA
Relais de commande du relais de démarrage
en continu
<16 A