Eliminación de averías
|
Instrucciones de uso
|
SCANIA Interlock
®
7x00
77
Número de anomalías
Se han registrado demasiadas infracciones.
Recurrir a tiempo a la asistencia de un Centro de Ser-
vicio autorizado Dräger-Interlock.
Error disp. de mano
/
contactar servicio
Fallo del dispositivo manual.
Desconectar y conectar el encendido y repetir la
prueba. Si el mensaje de error aparece de nuevo:
recurrir a la asistencia de un Centro de Servicio auto-
rizado Dräger-Interlock.
Error caja control
/
contactar servicio
Fallo en la unidad de control.
Desconectar y conectar el encendido y repetir la
prueba. Si el mensaje de error aparece de nuevo:
recurrir a la asistencia de un Centro de Servicio auto-
rizado Dräger-Interlock.
Comprobar cable y
conectar de nuevo!
No hay ninguna conexión entre el dispositivo
manual y la unidad de control.
Comprobar el conector del cable de conexión y
conectarlo de nuevo con el dispositivo manual y la
unidad de control. Si el mensaje de error aparece de
nuevo: recurrir a la asistencia de un Centro de Servi-
cio autorizado Dräger-Interlock.
Caja de control
no coincide
,
Versión SW:
Aceptar
La unidad de control y el dispositivo manual tienen
diferentes versiones de software.
Tras confirmar con la tecla OK, pueden verse las ver-
siones de software (p. ej., Rev. 1.9). Recurrir a un
Centro de Servicio autorizado Dräger-Interlock.
No se visualiza ningún mensaje legible en el dispo-
sitivo manual, sin embargo funcionan los pilotos
indicadores.
Temperatura del dispositivo manual demasiado
baja.
Realizar la prueba como de costumbre siguiendo la
guía del usuario por los pilotos indicadores.
Desacoplar el dispositivo manual y depositarlo en un
lugar con temperatura moderada. Conectar de nuevo
el dispositivo manual.
Ningún mensaje en la pantalla del dispositivo
manual.
No hay ninguna conexión entre el dispositivo
manual y la unidad de control.
Comprobar el conector del cable de conexión, desen-
chufar el conector del cable de conexión del disposi-
tivo manual y conectar de nuevo.
Si no aparece ninguna pantalla de nuevo: recurrir a un
Centro de Servicio autorizado Dräger-Interlock.
Fallo/indicación
Causa
Solución