To pause on a frequency
press
PSE
.
To lockout a frequency
press
F1
(
FrL/O
).
To unlock a frequency
see
Unlocking Search Frequencies
.
To toggle the receive mode
press
F2
(
Mode
).
To store a frequency
into the
Default Scan List
press
F3
(
Stor
).
To toggle the
search delay
on or off
press
FUNC
then
.
(
DELAY
).
To toggle attenuation for the search on or off
press
ATT
.
press
FUNC
then
0
.
Tune Mode for Analyzing Trunked System Frequencies:
Pressing
FUNC
TUNE
while scanning or paused on a trunked radio system will load the control channel frequency into TUNE mode if the control channel
frequency is the last frequency that the scanner checked while scanning.
Pressing
FUNC
TUNE
while receiving a trunked radio TGRP will load the voice channel frequency into TUNE mode.
Or, you can manually enter a control or voice channel by pressing
TUNE
then enter the frequency and press
SEL/ENT
.
Changing the
ADC Cal
(analog to digital conversion calibration?) setting (in the '
Expert Settings
' menu) will show different information.
OFF
(the default setting) will show the receive mode and CTCSS/DCS/NAC code for conventional frequencies and the information in the charts below for
trunking frequencies.
RSSI
will show digital received signal strength indication and analog voltage(?).
ZM
will show zeromatic tune thresholds(?).
DSP
will show
detect (
XF
), P25 control channel detection (
HD2
), and NAC detection (
HD5
) for digital frequencies and CTCSS/DCS/NAC detect
(
HD5
) for conventional frequencies.
Motorola P25 9600 baud Control Channel
Primary
Display (LCD BlinkOn)
Secondary
Display (LCD BlinkOff)
system type
P25
system type
P25:
NAC
nnn
system type
P25
control channel
ccc.cccc
system ID
Sy:
sss
RFSS ID (Zone)
R
rrr
site number
S
ttt
decoding quality
%
NAC
N
nnn
WACN Address
W:
wwwww
NAC=Network Access Code
RFSS=Radio Frequency Sub
System
WACN=Wide Area Communication Network
Motorola 3600 baud Control Channel
Primary
Display (LCD BlinkOn)
Secondary
Display (LCD BlinkOff)
system type
M36
control channel
ccc.cccc
system type
M36
control channel
ccc.cccc
tone?
CT:
cc.ccc
decoding quality
%
system ID
SID:
ssss
site number
S
ttt
EDACS (Wideband) 9600 baud Control Channel
Display
system type
EDW
(wideband) or
EDN
(
narrowband)
control channel
ccc.cccc
decoding quality
%
?
C
nn
site number
S:
nn
site type
h/H/s/S/a/A
h
=not home site
H
=is home site
s
=not SCAT site
S
=is SCAT site
a
=not aux site
A
=is aux site
LTR Home Repeater
Display
LCN number
Ch:
nn
tuned frequency
ccc.cccc
home repeater #
HR:
hh
area-home repeater-ID
A-HH-GGG
site number
S:
nn
/
MoveHR
Motorola Analog Voice Channel
Display
VC:lsTGID
nnnnn
voice channel
ccc.cccc
lsTGID
is the decoded talkgroup ID data from the lowspeed data stream.
Note that the analog lowspeed data protocol does not provide error
correction and some false "VC: lsTGID" readings should be expected.
Analyze Option
Analyze Mode
Motorola P25 System
