PSE (Pause)
Pauses scan or search mode.
1-0/A-Z
Used to turn scan lists 1-10 on/off. Inputs numbers or characters.
FUNC- 1-0
Used to turn scan lists 11-20 on/off.
FUNC-0
toggles Zeromatic Tuning on/off in dedicated search mode.
CL (Clear)
Clears an incorrect character in text mode.
FUNC-CL
Clears an entire entry field in text mode or deletes objects.
.(DELAY)
Inputs decimal point for frequency, space for text, or hyphen for TGID.
FUNC-.
(DELAY)
Toggles delay on/off for an object or for searches.
Function Soft Keys
on the base models
A Look at the Display
Scan Mode
Scan List 1
System Name
Program Mode Object #582
ID Number, System Name
Receiving Object #576
Voice Channel, ID Tag, Radio ID
Receiving Object #571
Control Channel, System Name, Radio
ID
Receiving Conventional Channel
Receiving Talkgroup ID
Scan Mode
Top Line
appears when you press
FUNC
to select Function Mode.
appears when the scanner is receiving a trunking control channel frequency.
appears when global attenuation is off for all objects/searches.
appears when global attenuation is on for all objects/searches.
appears when the squelch circuit is open for a trunking system.
appears to show the signal strength of a control channel frequency.
(HH only) warning appears solid when the batteries are weak.
critical warning flashes two times each second when battery failure is soon.
flashes empty each second when the charging circuit is active.
2nd Line
>>>Scanning<<<
appears.
3rd Line
Scan Lists
1-10
that are enabled for scan will appear. A
.
(dot) indicates the Scan List is disabled.
Blinking numbers
indicate empty Scan Lists.
