Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
13.1.3. Storage Counters
http://192.168.0.235/tools/storage.shtm
This page shows how many blocks each storage file is using, as well as how many bytes
have been lost. “Lost Old” is the number of bytes that have been recycled because the
channel was full. “Lost New” is the number of bytes that had to be thrown away because
there wasn’t space.
Click on the “
Reset Counters
” to zero the Lost Old and Lost New counters.
13.1.4. Reboot Lua
(post) http://192.168.0.235/lua/rebootlua
Reboots the internal Lua scripting engine. A Lua reboot is required if any
script
changes
have been made
. Rebooting Lua does not stop the delivery mechanisms from working.
However, because of the Lua protocols, all source collections are restarted.
If the scripts make use of internal variables then these are cleared. There is
no persistence between reboots.
Rebooting Lua will also temporarily disconnect all sources
13.1.5. Reboot ip.buffer (cold boot)
(post) http://192.168.0.235/lua/reboot
Reboots the unit completely. The page asks for confirmation before actually rebooting.
13.1.6. Battery off (shutdown)
(post) http://192.168.0.235/lua/batteryoff
Appears only when running from battery. Shuts down the batteries in 10 seconds.
7
Reboots are not required for any
configuration
changes – either by the web page or the Ad Hoc
change. These occur immediately.
8
Also any “emulation” destinations will be disconnected.
Page 110
Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
13.1.3. Storage Counters
http://192.168.0.235/tools/storage.shtm
This page shows how many blocks each storage file is using, as well as how many bytes
have been lost. “Lost Old” is the number of bytes that have been recycled because the
channel was full. “Lost New” is the number of bytes that had to be thrown away because
there wasn’t space.
Click on the “
Reset Counters
” to zero the Lost Old and Lost New counters.
13.1.4. Reboot Lua
(post) http://192.168.0.235/lua/rebootlua
Reboots the internal Lua scripting engine. A Lua reboot is required if any
script
changes
have been made
. Rebooting Lua does not stop the delivery mechanisms from working.
However, because of the Lua protocols, all source collections are restarted.
If the scripts make use of internal variables then these are cleared. There is
no persistence between reboots.
Rebooting Lua will also temporarily disconnect all sources
13.1.5. Reboot ip.buffer (cold boot)
(post) http://192.168.0.235/lua/reboot
Reboots the unit completely. The page asks for confirmation before actually rebooting.
13.1.6. Battery off (shutdown)
(post) http://192.168.0.235/lua/batteryoff
Appears only when running from battery. Shuts down the batteries in 10 seconds.
7
Reboots are not required for any
configuration
changes – either by the web page or the Ad Hoc
change. These occur immediately.
8
Also any “emulation” destinations will be disconnected.
Page 110
