Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
1 7 . SN M P A g e n t O ID L is t
The simple SNMP agent is suitable for “SNMP pinging” and automated network inventory.
The agent responds to SNMP v1 and v2c on the “
public
” community and provides SNMP
GET, GETNEXT, and GETBULK commands only (no SET operations).
It provides only the SNMP MIB-2 system group – 1.3.6.1.2.1.1 – as outlined:
1.3.6.1.2.1.1.1.0 sysDescr
See notes below
1.3.6.1.2.1.1.2.0 sysObjectID
The OID of the ip.buffer - 1.3.6.1.4.1.6024.1.3
1.3.6.1.2.1.1.3.0 sysUpTime
The sytem up time
1.3.6.1.2.1.1.4.0 sysContact
Programmable via the web page
1.3.6.1.2.1.1.5.0 sysName
Value of “
ip.buffer-
serial
”, e.g.
“
ip.buffer-00-02-ae-10-00-ae
”, or as
programmed via the web page
1.3.6.1.2.1.1.6.0 sysLocation
Programmable via the web page
1.3.6.1.2.1.1.7.0 sysServices
Fixed integer value of 72
The sysDescr field contains information about the buffer in the form:
SN=“
serialnumber
” DN=“
devicename
” FW=“
firmwareversion
” N=
“
comports
,
channels
,
files
” M=“
modem
” Scannex ip.buffer
Page 129
Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
1 7 . SN M P A g e n t O ID L is t
The simple SNMP agent is suitable for “SNMP pinging” and automated network inventory.
The agent responds to SNMP v1 and v2c on the “
public
” community and provides SNMP
GET, GETNEXT, and GETBULK commands only (no SET operations).
It provides only the SNMP MIB-2 system group – 1.3.6.1.2.1.1 – as outlined:
1.3.6.1.2.1.1.1.0 sysDescr
See notes below
1.3.6.1.2.1.1.2.0 sysObjectID
The OID of the ip.buffer - 1.3.6.1.4.1.6024.1.3
1.3.6.1.2.1.1.3.0 sysUpTime
The sytem up time
1.3.6.1.2.1.1.4.0 sysContact
Programmable via the web page
1.3.6.1.2.1.1.5.0 sysName
Value of “
ip.buffer-
serial
”, e.g.
“
ip.buffer-00-02-ae-10-00-ae
”, or as
programmed via the web page
1.3.6.1.2.1.1.6.0 sysLocation
Programmable via the web page
1.3.6.1.2.1.1.7.0 sysServices
Fixed integer value of 72
The sysDescr field contains information about the buffer in the form:
SN=“
serialnumber
” DN=“
devicename
” FW=“
firmwareversion
” N=
“
comports
,
channels
,
files
” M=“
modem
” Scannex ip.buffer
Page 129
