Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
Syslog
Server
Dotted IP address or name for syslog output messages.
[blank]
On bootup, a syslog message “
system: ip.buffer starting
” is output with facility
KERNEL, severity NOTICE.
All protected GETs and POSTs to the web-server will output a syslog USER facility with
NOTICE severity message in the form:
“
web:
ipaddress method /url?query username
”
Where:
ipaddress
is the browser's IP address in dotted form. e.g. “192.168.0.235”
method
is either “GET” or “POST”
/url?query
are the url and query (if present) given for the GET or POST
username
is the user that performed the action (if applicable)
By tracking the syslog output it is possible to maitain a basic audit tracking log of changes
made to the ip.buffer
Bandwidth Limiting
Max data
Value in kilo-bytes per second.
[0]
“
0
” means unlimited.
Normally the ip.buffer will transmit stored data as fast as it can. In some circumstances
this is undesirable. Setting a value other than zero will limit the transfer rate for all data
deliveries across the Ethernet interface. (Deliveries across the PPP interface will be sent as
fast as possible.)
8
Version 2.30+ stores all syslog messages in the Log, even if the syslog server entry is blank.
Page 24
Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
Syslog
Server
Dotted IP address or name for syslog output messages.
[blank]
On bootup, a syslog message “
system: ip.buffer starting
” is output with facility
KERNEL, severity NOTICE.
All protected GETs and POSTs to the web-server will output a syslog USER facility with
NOTICE severity message in the form:
“
web:
ipaddress method /url?query username
”
Where:
ipaddress
is the browser's IP address in dotted form. e.g. “192.168.0.235”
method
is either “GET” or “POST”
/url?query
are the url and query (if present) given for the GET or POST
username
is the user that performed the action (if applicable)
By tracking the syslog output it is possible to maitain a basic audit tracking log of changes
made to the ip.buffer
Bandwidth Limiting
Max data
Value in kilo-bytes per second.
[0]
“
0
” means unlimited.
Normally the ip.buffer will transmit stored data as fast as it can. In some circumstances
this is undesirable. Setting a value other than zero will limit the transfer rate for all data
deliveries across the Ethernet interface. (Deliveries across the PPP interface will be sent as
fast as possible.)
8
Version 2.30+ stores all syslog messages in the Log, even if the syslog server entry is blank.
Page 24
