Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
10.7.7. Protocol: Inter-Tel/Mitel Axxess & 5000 TCP/IP [port 4000]
This simple protocol is for connecting with TCP/IP to an Inter-Tel PBX or Mitel 5000 PBX
(repackaged Inter-Tel 5000). It provides the necessary sign on process to get the CDR
records out of the PBX
The Inter-Tel protocol allows for the connecting client to advertise an “application” name.
The ip.buffer declares itself as “ip.buffer-00-02-ae-xx-xx-xx” (where xx-xx-xx is the serial
number).
Protocol Parameters
Password
If the PBX requires a password, enter it here.
[blank]
Handling
“
Plain ASCII (original)
” – receives the incoming records
as ASCII. Lines may be prefixed with “Q” and “R” letters.
“
ASCII (correct)
” – correctly handles the Inter-Tel
protocol and stores the correct text.
“
” – correctly handles the Inter-Tel
protocol and stores the four binary length bytes + correct
text.
[Plain ASCII (original)]
29
Although you can use the Match/Send fields to do the same thing, this protocol provides a
convenient way of connecting to the Inter-Tel.
30
This option was added in version 2.92
Page 79
Scannex ip.buffer User Manual
© UK 2007-2021 Scannex Electronics Ltd. All rights reserved worldwide.
10.7.7. Protocol: Inter-Tel/Mitel Axxess & 5000 TCP/IP [port 4000]
This simple protocol is for connecting with TCP/IP to an Inter-Tel PBX or Mitel 5000 PBX
(repackaged Inter-Tel 5000). It provides the necessary sign on process to get the CDR
records out of the PBX
The Inter-Tel protocol allows for the connecting client to advertise an “application” name.
The ip.buffer declares itself as “ip.buffer-00-02-ae-xx-xx-xx” (where xx-xx-xx is the serial
number).
Protocol Parameters
Password
If the PBX requires a password, enter it here.
[blank]
Handling
“
Plain ASCII (original)
” – receives the incoming records
as ASCII. Lines may be prefixed with “Q” and “R” letters.
“
ASCII (correct)
” – correctly handles the Inter-Tel
protocol and stores the correct text.
“
” – correctly handles the Inter-Tel
protocol and stores the four binary length bytes + correct
text.
[Plain ASCII (original)]
29
Although you can use the Match/Send fields to do the same thing, this protocol provides a
convenient way of connecting to the Inter-Tel.
30
This option was added in version 2.92
Page 79
