Users / service manual for Scanomat Top Juicer
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone +45 49 18 18 00 • www.scanomat.dk
18
The Display:
The display will show relevant information in clear text, and in symbols.
Turning the machine on and off:
There are 2 ways of turning the machine off. Either by pressing and holding the ON/OFF button for 2
seconds, or by switching the power off completely by activating the mechanical switch in the
dispensing area.
Using the first option, will keep the electronic board running with a very low power consumption (less
than 1 watt). As the internal watch in the machine is dependent on power, always select this way to
turn the machine off, if you are using this. When the machine is OFF, the light in the display will be
gone, and only the Scanomat logo will be active.
Switching back on is done by pressing the ON/OFF button, or if this setting is active, by pressing a
selection button
Dispensing a single standard drink:
Place a cup under the proper dispensing outlet and press the selection button. If more than one outlet is
available, a graphic on the front of the machine will show which selections correspond with which
outlets. While brewing the display will show the name of the selected drink
Pressing STOP will interrupt the dispensing
Preselections:
Apart from the direct selection keys, a number of pre-selection possibilities are available, these will be
explained in detail hereafter. The pre-selections can be used more than one at a time, for example a
carafe of PRIME ORANGE is possible, if the machine has both of these options available. To cancel
any pre-selection, press STOP or NO. All the pre-selections are controlled by a timer meaning that if
no selections is made within 15 seconds after the pre-selection, this will time out. After the drink is
dispensed, all pre-selections are reset.
Dispensing carafes:
Making a carafe of any product in this machine is always carried out as making a number of cups of
the selection in question.
