Document type
Document number
Rev
Page
Manual
66024
C
9 of 37
3.3.3
Stop function panel
There is a red stop function switch (STOP) with a manual twist reset, a push button
and a red LED on the control unit's stop function panel, see figure 3.4.
The control unit is started with the spring reset push button ( )
All movement of the crane is stopped if the stop function is activated on the control
unit. The red LED indicates operating and battery status.
Figure 3.4 View of a stop function panel.
3.3.4
Changing radio channels
It is possible to change the radio channel by quickly pressing the button marked
twice. There are 10 different radio channels to switch between by pressing this
button in sequence.
Important notice:
Scanreco will introduce an automatic frequency management to the RC400 systems
in end of 2009 making the above described function; chapter 3.3.4 changing radio
channels, obsolete.
The automatic frequency management ensures a more reliable radio transmission
highly resistant to radio interference thanks to intelligent frequency hopping
technology automatically handling frequency changes.
The operator then no longer needs to manage radio frequency and the risk of
interference is minimized.
This user manual is printed prior to the introduction of the automatic frequency
management, for further information; please consult your distributor.
9/37
Summary of Contents for RC400
Page 1: ...Instruction Manual RemoteControlSystemRC400 Document 66024 Revision D Language English ...
Page 2: ......
Page 39: ......
Page 40: ......