background image

 

16 | 

5. Daily Care

 

 

This chapter describes how to clean the ScanSnap scanner.

 

WARNING

 

Fire/Electric Shock 

Before cleaning the scanner, disconnect the AC 
adapter from the power outlet. 
 

5.1. Cleaning Materials

 

Cleaning Materials 

Parts No. 

Remarks 

Cleaner F1

 

CA99501-0013

 

1 bottle (100ml) 
Moisten cloth with this fluid 
and wipe the scanner clean. 
(*1)

 

*1) To purchase the cleaning material, contact the FUJITSU 

scanner dealer where you purchased the scanner. 

 

5.2. Cleaning the Scanner Exterior 

Clean the scanner exterior and the Paper chute cover with a 
dry cloth or a cloth moistened with a small amount of 
neutral detergent or Cleaner F1 (sold separately).

 

 

  Never use paint thinner or other organic 

solvents.

 

  During the cleaning, take care not to let 

water or other moistures getting into the 
inside of the scanner.

 

  Do not use aerosol sprays to clean the 

scanner. Aerosol sprays cause dirt and 
dust to enter the scanner, resulting in 
scanner failure, scanner malfunction and 
image error.

 

 

 

5.3. Cleaning Inside of the scanner 

Clean inside of the scanner with a cloth moistened with 
cleaner F1. 
In an alternating succession of scanning documents, the 
accumulated paper-powder and dust inside the scanner 
causes a scanning error. 
As a guideline, clean the ADF every 1,000 scans. Note that 
this guideline varies according to the type of document you 
are scanning. For example, the ADF has to be cleaned 
more frequently when scanning photocopied documents on 
that the toner has not been sufficiently fixed on. 
Clean the ADF according to the following procedure 
referring to the illustrations.

 

WARNING

 

The glass surface inside the ADF becomes hot during 
the scanner operation. 
Before you start cleaning the inside of the scanner, 
disconnect the AC adapter from the outlet, and wait at 
least 15 minutes to let the scanner cool down.

 

CAUTION

 

When you perform cleaning, make sure that the inside of 
the scanner is free of any foreign object, and be careful 
not to get your hand or the cloth caught on the pick 
spring (metal part) as a deformed pick spring (metal 
part) may cause injury. 

 

  Never use water or neutral detergent to 

clean the inside of the scanner.

 

  Do not use aerosol sprays to clean the 

scanner. Aerosol sprays cause dirt and 
dust to enter the scanner, resulting 
scanner failure and malfunction.

 

 

1.

 

Open the ADF cover while pulling the Cover open 
lever.

 

 

 

Cover open lever 

ADF cover 

Cloth 

Neutral detergent 

or Cleaner F1 

Paint thinner 

Summary of Contents for fi-5110eox2

























Reviews: