English
8
OPERATING INSTRUCTIONS
Thermocouple Probe Scan Function
Press the mode key(8) until PRB appears: on the LCD.
This mode can only be reference when thermometer
probe is connected.
# The measurement range: -64 to +1400
o
C.
# ScanTemp440 will automatically shut off if left idle for more
than 12 min in PRB mode.
After measure high temp, the probe may remain HOT for a
while.
Connect
the
thermocouple
with
ScanTemp440’s thermocouple socket(10)
and put the probe in or on the target, the
temperature will be displayed beside the
“PRB” icon.
Summary of Contents for 440
Page 1: ...Infrared Thermometer SCANTEMP 440 User manual ...
Page 3: ...English 3 ...
