MODEL MB-35
MODEL MB-35
31
II.
GENERAL INFORMATION
Extension cords
Use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole receptacles that accept the
tool's plug. Replace or repair damaged cords. Make sure your extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord
will cause a drop in line voltage resulting in loss of power and overheating. See table for the correct size to use
depending on cord length and nameplate amperage rating. lf in doubt, use the next heavier gauge. The
smaller the gauge number, the heavier the cord.
Special instructions
1.
Read and follow operator's manual thoroughly.
2.
DO NOT touch rotating cutter or parts.
3.
Always stop machine completely and unplug from power source before changing cutters,
cleaning clips, refilling lubrication or performing adjustments.
4.
Never wear loose clothing or gloves when working near cutting area or machine arbor.
5.
Always wear eye protection. Any tool can shatter.
6.
Always use safety chain or strap provided with machine.
7.
Always use proper tooling. Keep cutters securely fastened.
8.
DO NOT use dull or broken cutters.
9.
Beware of ejected slugs at end of cut. They become HOT during the cut.
10.
Keep all safety features functioning and working properly.
11.
Keep bottom of magnet burr free and clear of chips and debris.
12.
To reduce the risk of electrical shock, DO NOT
remove
or alter electrical panels or use machine in
damp areas.
13.
Use only authorized service centers for repairs.
Summary of Contents for MB-35
