Please read this manual carefully before install and operation.
1.
Usage
This machine is suitable for shearing carbon steel plate and bar. It can be used to
shear non-ferrous metal or plastic and bar.
2.
Main technical specification
3.
Installation and caution
3.1
Installation
3.1.1
Please check whether the part of this machine are fully equipped and
not damaged to the parts list or part figure.
3.1.2
This machine should be mounted on hard ground or specific place
(not supplied).
3.1.3
Please leave plenty room around the machine for your easy operating,
in order to avoid injury.
3.1.4
Please remove the anti-rust grease on processing surfaces and some
parts included with kerosene.
3.2
Caution
3.2.1
Please read the manual before operation and make yourself
understand its structure and principle completely.
3.2.2
Please do not operate the material width and thickness than table list
max.range.
3.2.3
When you shear the plate or bar which list in above table, you must
be used lengthen handle in order to increase force.
3.2.4
Please do not touch the blade during operation.
