5
2.2 Safety
When working with the Scantool TSM 650 plate shears existing safety rules must
be kept in order to avoid personal injury or material damage.
A. User
Do not wear any loose clothing, gloves, rings, bracelets, or other jewellery to get
caught in moving parts. Non-slip foot wear is recommended. Wear protective hair
covering to protect long hair.
Always wear eye protection. Also use face or dust mask if cutting operation is
dusty. Glasses cannot replace eye protection.
Don’t overreach. Keep proper footing and balance at all times.
Never leave tool running unattended. Turn power off. Don’t leave tool until it has
come to a complete stop.
Don’t operate tool under the influence of drugs, alcohol or any medication.
B. Use of Machine
Don’t force tool. It will do the job better and be safer at the rate for which it was
designed.
Use right tool, use recommended accessories.
C. Adjustment
Make all adjustments with the power off. The user should read the detailed
instruction manual when doing adjustments and assembling the machine.
D. Working Environment
Keep working area clean. Cluttered areas and benches invite accidents.
Don’t use in dangerous environment. Don’t use power tool in damp or wet
locations or expose them to rain. Keep work area well lit.
Keep children and visitors away. All visitors should be kept at a safe distance from
work area.
E. Maintenance
Disconnect the machine from power source when making repairs.
Check damaged parts. To read all details on trouble shooting, repair it very
carefully and make sure the op
erator won’t get hurt or damage the machine.
Scantool TSM 650
is constructed to operate with the delivered equipment. DO
NOT make any changes or use any accessories not approved for
Scantool TSM
650.
